100% Original Bag House Air Filters - Polyester Antistatic Needle-punched Felt Bag – Xintian
100% Original Bag House Air Filters - Polyester Antistatic Needle-punched Felt Bag – Xintian Detail:
In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge.
Weight: 500g/ m²
Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm
Permeability: 15 m³/ m²· min
Radial control force: > 800N/5 x 20cm
Latitudinal control force: > 1200N/5 x 20cm
Radial control force: <35%
Latitudinal control force: <55%
Usage temperature:≤130°C
Post-treatment: singeing, calendering, or Teflon coating
Product detail pictures:
Related Product Guide:
In an effort to finest meet up with client's requirements, all of our operations are strictly performed in line with our motto "High High quality, Competitive Rate, Fast Service" for 100% Original Bag House Air Filters - Polyester Antistatic Needle-punched Felt Bag – Xintian , The product will supply to all over the world, such as: British, Doha, Las Vegas, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By Mag from Cyprus - 2017.07.28 15:46
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Anne from Borussia Dortmund - 2018.12.28 15:18
Related products
-
New Arrival China Purpose Of Electrostatic Prec...
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc. When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the d...
-
High Quality Electrostatic Precipitator Voltage...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...
-
New Arrival China Dust Collector Boiler - Heat...
-
Big discounting Electro-Magnetic Pulse Valve -...
In the process of producing needle-punched felt,conductive fibers or conductive materials are mixed into chemical fibers. The filter cloth is rolled and imegnated with PTFE (waterproof agent),which is used in occasions with high moisture content .The filter material is not easy to block the paste bag,the service life of the cloth bag is prolonged,the gas flow rate is increased, and the maintenance cost is greatly saved. The bag has the advantages of high void, good air permeability, high dust...
-
Personlized Products Esp For Boiler - Desulphu...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Short Lead Time for Baghouse Manufacturers - P...
In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge. Weight: 500g/ m² Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm Permeability: 15 m³/ m²· min Radial control force: > 800N/5 x 20cm Latitudinal control force: > 1200N/5 x 20cm Radial control force: <35% Latitudinal c...