• banner

Accessories Of Dust Collector

  • Acrylic Medium Temperature Needle-punched Filter Felt Bag

    Acrylic Medium Temperature Needle-punched Filter Felt Bag

    The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement Model No. And Specification Nominal Diameter Number of diaphragm Intake Port Size Air Outlet Conn ection Form Weight (kg) Metric System mm British System...
  • Double-Axis Dust Humidifying Mixer

    Double-Axis Dust Humidifying Mixer

    When working, the ash and slag in the silo will be uniformly sent to the cylinder by the impeller feeder, the blade will push the ash and slag forward, and the water supply nozzle will add an appropriate amount of water to stir and force mixing.  In the process of mixing, a certain gap between the cylinder wall and the stirring shaft is maintained to push the material to the discharge, which has the characteristics of compact structure, advanced technology, stable and reliable easy maintenance.

  • Fiberglass Needle-Punched Filter Felt Bag

    Fiberglass Needle-Punched Filter Felt Bag

    It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, minimal elongation and shrinkage, high strength. And the tapetum fiber bears single fiber, three-dimensional micro-porous structure, high porosity and low resistance to gas filtration. It is a kind of high-speed and high­efficiency high-temperature filtering material. It is widely used in high temperature flue gas filtration of industrial kilns such as chemical industry, iron and steel, smelting...
  • Screw conveyor series

    Screw conveyor series

    Working principle: When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...
  • Flumex (FMS) High Temperature Resistant Needle-punched Felt Bag

    Flumex (FMS) High Temperature Resistant Needle-punched Felt Bag

    Flumex dust filter bag is composed of two or more kinds of high temperature resistant fiber mixing and laminated, to achieve higher, updated physical and chemical properties. Flumex dust bag has the characteristics of high temperature resistance, high strength, acid and alkali corrosion resistance, wear resistance, bending resistance and so on. After different surface chemical treatment and finishing technology, it also has the characteristics of easy dust removal, water and oil resistance, a...
  • Y JD series Star Unloader

    Y JD series Star Unloader

    YJD-A/B series unloading device, also known as electric ash unloading valve and electric lock valve, consists of three parts: motor, tooth difference planetary reducer (X) or pinwheel cycloid reducer (Z) and rotary unloader. There are two series and 60 specifications The square flanges of import and export are type A, and the circular flanges are type B The device is a dust removal equipment, the main equipment for conveying, discharging ash, locking air and other equipment feeding. It is sui...
  • High-temperature PPS Needle-punched Filter Felt Bag

    High-temperature PPS Needle-punched Filter Felt Bag

    Metas dust collector bag in normal flue gas temperature conditions, bag type dust collector for dust filter bag temperature requirements below 150℃, and in the flue gas temperature is higher occasions. Because these dust containing smoke and gas dust is not suitable for the collection of electric dust collector due to the specific resistance limit, it can only be collected by cloth bags or other ways; If it is necessary to reduce the temperature containing dust to below 150℃, the investment is higher or subject to the restrictions of the site site; Because the dust gas contains sulfur components, dust gas has acid “dew point”, can only be above the acid dew point that is, the temperature is high in the state of filtration and separation and other factors, so you need to have a kind of resistance to high temperature chemical fiber used to make filter materials, metas needled felt filter bag is suitable for these occasions.

  • Metas Needle-punched Filtration Felt Bag at High Temperature

    Metas Needle-punched Filtration Felt Bag at High Temperature

    Metas dust collector bag in normal flue gas temperature conditions, bag type dust collector for dust filter bag temperature requirements below 150℃, and in the flue gas temperature is higher occasions. Because these dust containing smoke and gas dust is not suitable for the collection of electric dust collector due to the specific resistance limit, it can only be collected by cloth bags or other ways; If it is necessary to reduce the temperature containing dust to below 150℃, the investment is higher or subject to the restrictions of the site site; Because the dust gas contains sulfur components, dust gas has acid “dew point”, can only be above the acid dew point that is, the temperature is high in the state of filtration and separation and other factors, so you need to have a kind of resistance to high temperature chemical fiber used to make filter materials, metas needled felt filter bag is suitable for these occasions.

  • P84 High Temperature Resistant Needle-punched Felt Bag

    P84 High Temperature Resistant Needle-punched Felt Bag

    Polyimide fiber, also known as P84 fiber, is a heat-resistant fiber with excellent high temperature resistance. At 300℃ for 100 h, the strength retention rate is 50%, the elongation is reduced by 5% ~ 10%, and the exposure rate is 250 H, strength retention rate of 45%, excellent dimensional stability at 275℃, no melting, glass temperature of 315℃, only release a little harmful gas when decomposition. It can run continuously at 260℃ and the instantaneous working temperature can reach 280℃.

  • Polyester Antistatic Needle-punched Felt Bag

    Polyester Antistatic Needle-punched Felt Bag

    In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge. Weight: 500g/ m² Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm Permeability: 15 m³/ m²· min Radial control force: > 800N/5 x 20cm Latitudinal control force: > 1200N/5 x 20cm Radial control force:
  • Polyester Needle-Punched Felt Bag

    Polyester Needle-Punched Felt Bag

    Polyester needled felt (dust removal filter bag) is made of non-woven needling processing technology, that is, the fabric base cloth as the core material is spread on both sides of the fiber layer of uniform density after carding, and then with the needle with the back point to prick, the fiber of the base cloth is complexed, and made after singing, heat setting, calendering and other finishing processes.

  • DMF-Z Right Angle Electromagnetic Pulse Valve

    DMF-Z Right Angle Electromagnetic Pulse Valve

    DMF-Z Right Angle Electromagnetic Pulse Valve: The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement. Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided...
12 Next > >> Page 1 / 2