Fast delivery Dust Bag Filter - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian
Fast delivery Dust Bag Filter - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian Detail:
DMF-Z Right Angle Electromagnetic Pulse Valve:
The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement.
Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, submerged type and straight-through type. The solenoid pulse valve is the compressed air switch of pulse bag dust collector dust cleaning and blowing system.By pulse valve injection controller output signal control, pulse valve is connected with one end of the compressed air package, the other end is connected with the spray pipe, pulse valve back pressure chamber is connected with the control valve, pulse controller controls the control valve and pulse valve open.When the controller has no signal output, the exhaust port of the control valve is closed and the nozzle of the pulse valve is closed.When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out (from the spray torch gas for a wind).Pulse valve life: five years under the condition of standard installation, correct use and reasonable maintenance.
|
Model No. And Specification |
Nominal Diameter |
Number of diaphragm |
Intake Port Size |
Air Outlet |
Weight (kg) |
|
|
Metric System |
British System |
|||||
|
DMF-Z－20 |
ø20 |
3/4″ |
1 |
G3/4″ |
G3/4″ |
0.65 |
|
DMF-20L-B |
ø20 |
3/4″ |
1 |
G3/4″ |
ø27 |
0.75 |
|
DMF-Z－25 |
ø25 |
1″ |
1 |
G1″ |
G1″ |
0.8 |
|
DMF-Z－40S |
ø40 |
1′/2″ |
2 |
G1′/2″ |
G1′/2″ |
1.4 |
|
DMF-Z－50S |
ø50 |
2″ |
2 |
G2″ |
G2″ |
2.4 |
|
DMF-Z－62S |
ø62 |
2′/2″ |
2 |
G2′/2″ |
G2′/2″ |
3.5 |
|
DMF-Z－76S |
ø76 |
3″ |
2 |
G3″ |
G3″ |
4.3 |
|
DMF-Z－102S |
ø102 |
4″ |
2 |
G4″ |
G4″ |
7.3 |
Product detail pictures:
Related Product Guide:
"Control the standard by the details, show the power by quality". Our business has strived to establish a highly efficient and stable team staff and explored an effective good quality regulate course of action for Fast delivery Dust Bag Filter - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian , The product will supply to all over the world, such as: United States, Lithuania, Finland, we sincerely hope to establish a good and long-term business relationship with your esteemed company through this opportunity, based on equality, mutual benefit and win-win business from now to the future. "Your satisfaction is our happiness".
By Andrea from panama - 2018.06.18 19:26
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Pamela from Zambia - 2017.11.20 15:58
Related products
-
Short Lead Time for Single Bag Dust Collector -...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...
-
Rapid Delivery for Baghouse Dust Collection Sys...
SJ double-axis dust humidifier When working, the ash and slag in the silo will be uniformly sent to the cylinder by the impeller feeder, the blade will push the ash and slag forward, and the water supply nozzle will add an appropriate amount of water to stir and force mixing. In the process of mixing, a certain gap between the cylinder wall and the stirring shaft is maintained to push the material to the discharge, which has the characteristics of compact structure, advanced technology, stabl...
-
Good Wholesale Vendors Dust Collector Socks - ...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Original Factory Right Angle Eletromagnetic Pul...
P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to ...
-
OEM/ODM China Electrostatic Precipitator Workin...
Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...
-
Factory wholesale Pulse Dust Collector - Desul...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...