Good Wholesale Vendors Dust Collector Socks - HMC series pulse cloth bag dust collector – Xintian
Good Wholesale Vendors Dust Collector Socks - HMC series pulse cloth bag dust collector – Xintian Detail:
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc.
When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the dust particles with a large proportion settle into the ash hopper, and the lighter dust depends on the air induction to reach the surface of dust removal filter bag. The filter bag of dust collector generally uses needle felt as the filter carrier, and the filtration accuracy can reach <1um. The dust is blocked on the surface by the filter bag, and the dust gas is purified through the filter bag. With the increasing of time, more and more dust is filtered on the surface of filter bag, so the resistance of the filter bag is gradually increased. In order to make the dust collector work normally, when the resistance rises to a limited range, the electronic pulse controller issues instructions to follow the order. The sequence triggers each control valve to open the pulse valve, and the compressed air in the gas storage bag of dust collector is sprayed into the corresponding filter bag by each injection hole of the injection pipe. The filter bag expands rapidly under the instantaneous reverse action of air flow, which makes the dust attached to the surface of the filter bag fall off and makes the filter bag achieve the most original air permeability filtration effect. The cleared dust falls into the ash hopper and drains out of the body through the ash removal system to complete the whole ash cleaning and filtration process.
Technical Parameters of Equipment Selection:
|
Equipment Model |
HMC-24 |
HMC-32 |
HMC-36 |
HMC-48 |
HMC-64 |
HMC-80 |
|
|
Total Filtration Area m² |
20 |
25 |
30 |
40 |
50 |
64 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
1200-2400 |
1500-3000 |
1800-3600 |
2400-4800 |
3000-6000 |
3840-7680 |
|
|
Quantity of Filter Bag |
24 |
32 |
36 |
48 |
64 |
80 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
4 |
4 |
6 |
6 |
8 |
8 |
|
|
Induced Draft Fan Model |
4-72-2.8A |
4-72-3.2A |
4-72-3.6A |
4-72-3.6A |
4-72-4A |
4-72-4.5A |
|
|
Power of Motor |
1.5kw |
2.20kw |
3kw |
4kw |
5.5kw |
7.5kw |
|
Equipment Model: HMC- 160B Pulse Cloth Bag Dust Collector
Application Field: Dust removal of combined grinder, grooving machine, grinding and cutting machine.
|
Equipment Model |
HMC-96 |
HMC-100 |
HMC-120 |
HMC-160 |
HMC-200 |
HMC-240 |
|
|
Total Filtration Area m² |
77 |
80 |
96 |
128 |
160 |
192 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
4620-9240 |
4800-9600 |
5760-11520 |
7680-15360 |
9600-19200 |
11520-23040 |
|
|
Quantity of Filter Bag |
96 |
100 |
120 |
160 |
200 |
240 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
12 |
10 |
12 |
16 |
20 |
20 |
|
|
Induced Draft Fan Model |
4-72-4.5A |
4-72-4.5A |
4-72-5A |
4-72-5A |
4-68-8C |
4-68-6.3C |
|
|
Power of Motor |
7.5kw |
7.5kw |
11kw |
15kw |
18.5kw |
22kw |
|
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Good Wholesale Vendors Dust Collector Socks - HMC series pulse cloth bag dust collector – Xintian , The product will supply to all over the world, such as: Australia, Malawi, Greece, Our Company has qualified engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the items, Be sure to feel free to contact us.
By Daphne from Jordan - 2017.11.01 17:04
The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
By Elsa from Benin - 2017.08.16 13:39
Related products
-
Factory Promotional Dust Collector Valve - Pol...
In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge. Weight: 500g/ m² Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm Permeability: 15 m³/ m²· min Radial control force: > 800N/5 x 20cm Latitudinal control force: > 1200N/5 x 20cm Radial control force: <35% Latitudinal c...
-
factory Outlets for Esp Air Pollution - HMC se...
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc. When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the d...
-
High reputation Dust Collectors For Sale - Cyc...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-viscous...
-
Personlized Products Homemade Iron Removal Filt...
Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...
-
Good quality Boiler Dust - Dust Pollution Cont...
Product Description For the collection and treatment of floating and suspended dust with a large amount of dust, an automatic discharge valve is added under the ash hopper, which has the advantages of stability and reliability, small size, good sealing performance, convenient maintenance, and long service life. For the collection and treatment of floating and suspended dust with a large amount of dust, its speed is 24r/min, and discharge valves of different powers can be selected according to...
-
OEM Customized Dust Collector Machine For Indus...
Product Description Dust collector is a system for filtering dust in flue gas/gas. Mainly used for the purification and recovery of dusty gas. The shell of the air pulse jet bag filter is an outdoor type, consisting of a shell, a chamber, an ash hopper, a discharge system, an injection system and an automatic control system. According to different combinations, there are many different specifications, air filter room and indoor air filter bag. There are four series of bags: 32, 64, 96, 128, w...