Hot sale Factory Electrostatic Precipitator Uses - Desulphurization dust collector – Xintian
Hot sale Factory Electrostatic Precipitator Uses - Desulphurization dust collector – Xintian Detail:
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the purified smoke rises from the chimney.
The desulphurization rate is higher than 95%, and the outlet concentration of smoke is less than 50mg / Nm3 .
There is no nozzle, which has no blockage, scaling and other problems .
The liquid-gas ratio is low, only about 20% of the air tower spray .
The failure rate is very low, as long as the induced draft fan and the liquid supply pump are normal, the device can operate stably and the operation is very simple.
The consumption of wind pressure is only 1200 – 1500 Pa .
After treatment, the flue gas does not contain foggy water droplets .
Low operating cost and investment .
The limestone slurry, lime slurry, alkali liquor, waste water of alkali liquor and the like can be used as the desulfurizing agent.
For high concentration, it is difficult to deal with the standard flue gas by general method. The flue gas with contents of S02 higher than 10000mg/Nm3 can be purified below 100mg/Nm3.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Hot sale Factory Electrostatic Precipitator Uses - Desulphurization dust collector – Xintian , The product will supply to all over the world, such as: Costa Rica, Canada, Mauritania, We pay high attention to customer service, and cherish every customer. We've maintained a strong reputation in the industry for many years. We are honest and work on building a long-term relationship with our customers.
By Cornelia from Turkey - 2018.06.03 10:17
This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Nina from United Arab Emirates - 2017.10.27 12:12
Related products
-
factory customized Dry Electrostatic Precipitat...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Good Wholesale Vendors Dust Collector Socks - ...
According to the structure type of electric tar catcher, there are four kinds of vertical (concentric circular, tubular, cellular) and horizontal. The vertical electric tar catcher is mainly composed of shell, precipitating pole, corona pole, upper and lower hangers, gas redistribution board, steam blowing and washing tube, insulation box and feeder box and so on, which is mainly used for flue gas purification of gas generator with coke as raw material and coal as raw material. Horizontal ele...
-
Good quality Bag House Filters - Fiberglass Ne...
It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, minimal elongation and shrinkage, high strength. And the tapetum fiber bears single fiber, three-dimensional micro-porous structure, high porosity and low resistance to gas filtration. It is a kind of high-speed and highefficiency high-temperature filtering material. It is widely used in high temperature flue gas filtration of industrial kilns such as chemical industry, iron and steel, smelting...
-
Factory supplied Electro Magnetic Pulse Valve -...
High and Low Voltage Electrical Control Cabinet of Dust Collector Specializing in production of dust collector switchgear, control cabinet, high voltage electrostatic precipitator low voltage control cabinet, PLC automatic control system, microcomputer automatic control system, single chip microcomputer automatic control system, industrial network remote control system. Pneumatic technology takes air compressor as power source and compressed air as working medium to carry out energy transfer ...
-
OEM Supply Jet Pulse Bag Filter - Double-Axis ...
SJ double-axis dust humidifier When working, the ash and slag in the silo will be uniformly sent to the cylinder by the impeller feeder, the blade will push the ash and slag forward, and the water supply nozzle will add an appropriate amount of water to stir and force mixing. In the process of mixing, a certain gap between the cylinder wall and the stirring shaft is maintained to push the material to the discharge, which has the characteristics of compact structure, advanced technology, stabl...
-
Newly Arrival Pps Filter Bag - High-temperatur...
Beauty, dust bag with resistance to high temperature (204 ~ 240 ℃), strong acid, alkali, high filtering speed, low pressure loss, and the characteristics of the folding, good resistance to wear, but is not in the heat resistance to hydrolysis, mainly used in the asphalt mixing station flue gas, steel blast furnace gas, flue gas, carbon black (white carbon black) exhaust, cement kiln kiln kiln head, at high temperature furnace flue gas, Firebrick furnace smoke and coking smoke and other workin...