Hot-selling Fabric Filter Baghouse - DMF- Y electromagnetic pulse valve – Xintian
Hot-selling Fabric Filter Baghouse - DMF- Y electromagnetic pulse valve – Xintian Detail:
DMF-Y Submerged Electromagnetic Pulse Valve:
DMF- Y electromagnetic pulse valve is a submerged valve (also known as embedded valve), which is directly installed on the gas distribution box and has better flow characteristics. The pressure loss is reduced, which is suitable for the work occassion with lower gas source pressure.
Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, submerged type and straight-through type. The solenoid pulse valve is the compressed air switch of pulse bag dust collector dust cleaning and blowing system.By pulse valve injection controller output signal control, pulse valve is connected with one end of the compressed air package, the other end is connected with the spray pipe, pulse valve back pressure chamber is connected with the control valve, pulse controller controls the control valve and pulse valve open.When the controller has no signal output, the exhaust port of the control valve is closed and the nozzle of the pulse valve is closed.When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out (from the spray torch gas for a wind).Pulse valve life: five years under the condition of standard installation, correct use and reasonable maintenance.
|
Model No. And Specification |
Nominal Diameter |
Number of diaphragm |
Air Outlet |
Weight (kg) |
|
|
Metric System |
British System |
||||
|
DMF-Y－25 |
ø20 |
1″ |
1 |
G1″ |
0.8 |
|
DMF-Y－40S |
ø40 |
1′/2″ |
2 |
G1′/2″ |
1.2 |
|
DMF-Y－50S |
ø50 |
2″ |
2 |
ø60 |
2.5 |
|
DMF-Y－62S |
ø62 |
2′/2″ |
2 |
ø75 |
3.5 |
|
DMF-Y－76S |
ø76 |
3″ |
2 |
ø89 |
3.7 |
|
DMF-Y－90S |
ø90 |
3′/2″ |
2 |
ø102 |
5 |
|
DMF-Y－102S |
ø102 |
4″ |
2 |
ø114 |
5.65 |
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and superb good quality control throughout all stages of manufacturing enables us to guarantee total buyer gratification for Hot-selling Fabric Filter Baghouse - DMF- Y electromagnetic pulse valve – Xintian , The product will supply to all over the world, such as: Sao Paulo, Poland, Dominica, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Sabina from Slovenia - 2018.06.21 17:11
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Irene from Canberra - 2017.01.11 17:15
Related products
-
Manufactur standard Filter Bag Cages Manufactur...
It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, minimal elongation and shrinkage, high strength. And the tapetum fiber bears single fiber, three-dimensional micro-porous structure, high porosity and low resistance to gas filtration. It is a kind of high-speed and highefficiency high-temperature filtering material. It is widely used in high temperature flue gas filtration of industrial kilns such as chemical industry, iron and steel, smelting...
-
Big Discount Working Of Electrostatic Precipita...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Factory Promotional Dust Collector Valve - Thr...
In the process of producing needle-punched felt,conductive fibers or conductive materials are mixed into chemical fibers. The filter cloth is rolled and imegnated with PTFE (waterproof agent),which is used in occasions with high moisture content .The filter material is not easy to block the paste bag,the service life of the cloth bag is prolonged,the gas flow rate is increased, and the maintenance cost is greatly saved. The bag has the advantages of high void, good air permeability, high dust...
-
Factory Free sample Anti Static Filter Bag - D...
DMF-Y Submerged Electromagnetic Pulse Valve: DMF- Y electromagnetic pulse valve is a submerged valve (also known as embedded valve), which is directly installed on the gas distribution box and has better flow characteristics. The pressure loss is reduced, which is suitable for the work occassion with lower gas source pressure. Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, s...
-
Quality Inspection for Esp Electrostatic - Hig...
According to the structure type of electric tar catcher, there are four kinds of vertical (concentric circular, tubular, cellular) and horizontal. The vertical electric tar catcher is mainly composed of shell, precipitating pole, corona pole, upper and lower hangers, gas redistribution board, steam blowing and washing tube, insulation box and feeder box and so on, which is mainly used for flue gas purification of gas generator with coke as raw material and coal as raw material. Horizontal ele...
-
Good Quality Cement Dust Collector - Desulphur...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...