Manufactur standard Filter Bag Cages Manufacturers - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian
Manufactur standard Filter Bag Cages Manufacturers - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian Detail:
DMF-Z Right Angle Electromagnetic Pulse Valve:
The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement.
Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, submerged type and straight-through type. The solenoid pulse valve is the compressed air switch of pulse bag dust collector dust cleaning and blowing system.By pulse valve injection controller output signal control, pulse valve is connected with one end of the compressed air package, the other end is connected with the spray pipe, pulse valve back pressure chamber is connected with the control valve, pulse controller controls the control valve and pulse valve open.When the controller has no signal output, the exhaust port of the control valve is closed and the nozzle of the pulse valve is closed.When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out (from the spray torch gas for a wind).Pulse valve life: five years under the condition of standard installation, correct use and reasonable maintenance.
|
Model No. And Specification |
Nominal Diameter |
Number of diaphragm |
Intake Port Size |
Air Outlet |
Weight (kg) |
|
|
Metric System |
British System |
|||||
|
DMF-Z－20 |
ø20 |
3/4″ |
1 |
G3/4″ |
G3/4″ |
0.65 |
|
DMF-20L-B |
ø20 |
3/4″ |
1 |
G3/4″ |
ø27 |
0.75 |
|
DMF-Z－25 |
ø25 |
1″ |
1 |
G1″ |
G1″ |
0.8 |
|
DMF-Z－40S |
ø40 |
1′/2″ |
2 |
G1′/2″ |
G1′/2″ |
1.4 |
|
DMF-Z－50S |
ø50 |
2″ |
2 |
G2″ |
G2″ |
2.4 |
|
DMF-Z－62S |
ø62 |
2′/2″ |
2 |
G2′/2″ |
G2′/2″ |
3.5 |
|
DMF-Z－76S |
ø76 |
3″ |
2 |
G3″ |
G3″ |
4.3 |
|
DMF-Z－102S |
ø102 |
4″ |
2 |
G4″ |
G4″ |
7.3 |
Product detail pictures:
Related Product Guide:
Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of Manufactur standard Filter Bag Cages Manufacturers - DMF-Z Right Angle Electromagnetic Pulse Valve – Xintian , The product will supply to all over the world, such as: Casablanca, Guinea, Hungary, Hard work to keep making progress, innovation in the industry, make every effort to first-class enterprise. We try our best to build the scientific management model, to learn abundant experienced knowledge, to develop advanced production equipment and production process , to create the first-call quality goods, reasonable price , high quality of service , quick delivery , to present you create new value .
By Elsie from Singapore - 2018.11.06 10:04
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Rachel from Netherlands - 2017.08.18 18:38
Related products
-
Cheapest Factory Mac Pulse Valve - China Singl...
Product Description Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamber the same, and under the action of the spring, the diaphragm will block the blowi...
-
New Arrival China Purpose Of Electrostatic Prec...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...
-
Hot sale Factory Electrostatic Precipitator Use...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Chinese wholesale Electrostatic Precipitator Fo...
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc. When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the d...
-
Hot New Products Solenoid Valve Dust Collector ...
Working principle： When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...
-
100% Original Metal Dust Collectors - Desulphu...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...