OEM/ODM Manufacturer Fabric Filters Air Pollution Control - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian
OEM/ODM Manufacturer Fabric Filters Air Pollution Control - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian Detail:
P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to improve the filtration efficiency. Due to the irregular cross section of P84 fiber, the fiber has strong binding force and tangling force. Compared with glass fiber, the chemical properties, strength, wear resistance, fracture resistance and service life of P84 fiber are significantly improved. But the P84 fiber is not resistant to hydrolysis.
It has remarkable temperature resistance and good chemical resistance It has certain advantages in filtration of acid waste gas and alkaline dust It has low backwash pressure and high sludge cake efficiency It is used in asphalt plants. cement plants, waste incinerators. liquid bed boilers and coal-fired boilers.
Weight 500g/ m²
Material P84/P84 substrate
Thickness 2 3mm
Permeability 15 m³/ m²· min
Radial control force > 700N/5 x 20cm
Latitudinal control force > 1300N/5 x 20cm
Radial control force <35%
Latitudinal control force <55%
Usage temperatures≤ 260°C
Post-treatment high temperature hot pressing and singeing
Product detail pictures:
Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for OEM/ODM Manufacturer Fabric Filters Air Pollution Control - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian , The product will supply to all over the world, such as: Singapore, Paraguay, Houston, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Anne from Kuala Lumpur - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Novia from Bulgaria - 2018.09.21 11:44
Related products
-
Factory made hot-sale Use Of Electrostatic Prec...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Discountable price Smoke Precipitator - Cyclon...
Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...
-
Special Price for Dust Collector Filter Bag Mat...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Hot sale Factory Electrostatic Precipitator Use...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Factory directly Dmf-Y Submerged Electromagneti...
The waterproof grade of polyester two-pruned felt filter bag reaches level. It also ensures that the polyester two-pruned felt filter bag is not easy to block in the environment with large humidity, which greatly increases the service life of the filter bag and reduces the difficulty of manual operation. At the same time, the surface of the polyester two-prick needle-proof felt filter bag is smooth and the air permeability is good, which ensures the characteristics of the outer filter surface...
-
Online Exporter Craftex Dust Collector Bags - ...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
