PriceList for Industrial Dust Collector System - HMC series pulse cloth bag dust collector – Xintian
PriceList for Industrial Dust Collector System - HMC series pulse cloth bag dust collector – Xintian Detail:
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc.
When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the dust particles with a large proportion settle into the ash hopper, and the lighter dust depends on the air induction to reach the surface of dust removal filter bag. The filter bag of dust collector generally uses needle felt as the filter carrier, and the filtration accuracy can reach <1um. The dust is blocked on the surface by the filter bag, and the dust gas is purified through the filter bag. With the increasing of time, more and more dust is filtered on the surface of filter bag, so the resistance of the filter bag is gradually increased. In order to make the dust collector work normally, when the resistance rises to a limited range, the electronic pulse controller issues instructions to follow the order. The sequence triggers each control valve to open the pulse valve, and the compressed air in the gas storage bag of dust collector is sprayed into the corresponding filter bag by each injection hole of the injection pipe. The filter bag expands rapidly under the instantaneous reverse action of air flow, which makes the dust attached to the surface of the filter bag fall off and makes the filter bag achieve the most original air permeability filtration effect. The cleared dust falls into the ash hopper and drains out of the body through the ash removal system to complete the whole ash cleaning and filtration process.
Technical Parameters of Equipment Selection:
|
Equipment Model |
HMC-24 |
HMC-32 |
HMC-36 |
HMC-48 |
HMC-64 |
HMC-80 |
|
|
Total Filtration Area m² |
20 |
25 |
30 |
40 |
50 |
64 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
1200-2400 |
1500-3000 |
1800-3600 |
2400-4800 |
3000-6000 |
3840-7680 |
|
|
Quantity of Filter Bag |
24 |
32 |
36 |
48 |
64 |
80 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
4 |
4 |
6 |
6 |
8 |
8 |
|
|
Induced Draft Fan Model |
4-72-2.8A |
4-72-3.2A |
4-72-3.6A |
4-72-3.6A |
4-72-4A |
4-72-4.5A |
|
|
Power of Motor |
1.5kw |
2.20kw |
3kw |
4kw |
5.5kw |
7.5kw |
|
Equipment Model: HMC- 160B Pulse Cloth Bag Dust Collector
Application Field: Dust removal of combined grinder, grooving machine, grinding and cutting machine.
|
Equipment Model |
HMC-96 |
HMC-100 |
HMC-120 |
HMC-160 |
HMC-200 |
HMC-240 |
|
|
Total Filtration Area m² |
77 |
80 |
96 |
128 |
160 |
192 |
|
|
Filtration Velocity m³/min |
1.0-2.0 |
||||||
|
Air Volume m³/h |
4620-9240 |
4800-9600 |
5760-11520 |
7680-15360 |
9600-19200 |
11520-23040 |
|
|
Quantity of Filter Bag |
96 |
100 |
120 |
160 |
200 |
240 |
|
|
Specification and Material of Filter Bag |
130*2000mm |
||||||
|
Air Outlet Dust Concentration mg/m³ |
≤30 |
||||||
|
Beard Negative Pressure Pa |
5000 |
||||||
|
Equipment Running Resistance Pa |
800-1200 |
||||||
|
Injection Pressure Mpa |
0.4-0.6 |
||||||
|
Electromagnetic |
Specification |
DMF-Z-25(G1″) |
|||||
|
Quantity |
12 |
10 |
12 |
16 |
20 |
20 |
|
|
Induced Draft Fan Model |
4-72-4.5A |
4-72-4.5A |
4-72-5A |
4-72-5A |
4-68-8C |
4-68-6.3C |
|
|
Power of Motor |
7.5kw |
7.5kw |
11kw |
15kw |
18.5kw |
22kw |
|
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for PriceList for Industrial Dust Collector System - HMC series pulse cloth bag dust collector – Xintian , The product will supply to all over the world, such as: belarus, Jersey, Bangkok, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
By Carey from Bangladesh - 2017.01.11 17:15
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Meroy from San Francisco - 2017.06.16 18:23
Related products
-
Low price for Dust Collection Units - Big Airf...
-
Manufacturer for Reverse Pulse Jet Dust Collect...
HMC series pulse cloth bag dust collector is a single type bag dust collector. It adopts circular filter bag, self-contained air ventilation system with pulse injection ash cleaning mode, which has advantages of high dust removal efficiency, good ash cleaning effect, low operation resistance, long service life of filter bag, simple maintenance and stable operation, etc. When the dust gas enters into the cloth bag dust collector from air induced system, due to the decrease of wind speed, the d...
-
Factory wholesale Industrial Dust Removal - Fi...
Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...
-
Factory selling Star Discharger - Y JD series ...
YJD-A/B series unloading device, also known as electric ash unloading valve and electric lock valve, consists of three parts: motor, tooth difference planetary reducer (X) or pinwheel cycloid reducer (Z) and rotary unloader. There are two series and 60 specifications The square flanges of import and export are type A, and the circular flanges are type B The device is a dust removal equipment, the main equipment for conveying, discharging ash, locking air and other equipment feeding. It is sui...
-
Factory wholesale Industrial Dust Removal - Du...
Product Description For the collection and treatment of floating and suspended dust with a large amount of dust, an automatic discharge valve is added under the ash hopper, which has the advantages of stability and reliability, small size, good sealing performance, convenient maintenance, and long service life. For the collection and treatment of floating and suspended dust with a large amount of dust, its speed is 24r/min, and discharge valves of different powers can be selected according to...
-
High definition Cement Filter - Framework of D...
The framework is the “rb”of the filter bag.It is welded once by automatic welding equipment.the welding is firm and the appearance is smooth and straight,so that the filter bag is not damaged.It is light and easy to install and maintain.Zinc plating or plastic spraying process is used for surface post-treatment. Dust removal framework is one of the indispensable main accessories of cloth bag dust remover. It can be compatible with six, eight, ten, twelve, sixteen, eighteen, twenty...