Professional Design Dust Collector Bag House - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian
Professional Design Dust Collector Bag House - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian Detail:
P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to improve the filtration efficiency. Due to the irregular cross section of P84 fiber, the fiber has strong binding force and tangling force. Compared with glass fiber, the chemical properties, strength, wear resistance, fracture resistance and service life of P84 fiber are significantly improved. But the P84 fiber is not resistant to hydrolysis.
It has remarkable temperature resistance and good chemical resistance It has certain advantages in filtration of acid waste gas and alkaline dust It has low backwash pressure and high sludge cake efficiency It is used in asphalt plants. cement plants, waste incinerators. liquid bed boilers and coal-fired boilers.
Weight 500g/ m²
Material P84/P84 substrate
Thickness 2 3mm
Permeability 15 m³/ m²· min
Radial control force > 700N/5 x 20cm
Latitudinal control force > 1300N/5 x 20cm
Radial control force <35%
Latitudinal control force <55%
Usage temperatures≤ 260°C
Post-treatment high temperature hot pressing and singeing
Product detail pictures:
Related Product Guide:
No matter new shopper or old customer, We believe in very long expression and dependable relationship for Professional Design Dust Collector Bag House - P84 High Temperature Resistant Needle-punched Felt Bag – Xintian , The product will supply to all over the world, such as: Chile, Sri Lanka, Vietnam, We are proud to supply our products to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Hilary from Colombia - 2017.03.28 16:34
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Amber from Turkmenistan - 2018.12.28 15:18
Related products
-
Factory Supply Bag Filter Cement Plant - MC &#...
Product Description Warehouse top bag filter is a kind of high efficient purification equipment for all kinds of storehouse top, it adopts advanced dust removal technology, has the characteristics of large gas processing capacity, good purification effect, simple structure, reliable operation, less maintenance work and so on.The MC- 48 pulse bag storage top dust collector produced by our company is a special dust removal equipment which is mainly aimed at the improvement of cement plant Kudin...
-
Manufactur standard Filter Bag Cages Manufactur...
DMF-Z Right Angle Electromagnetic Pulse Valve: The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement. Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided...
-
Quality Inspection for Esp Electrostatic - Des...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Good User Reputation for Cyclone Bag Filter - ...
The DMF- Z electromagnetic pulse valve is a right angle valve with an angle of 90 degrees between the inlet and outlet, which is suitable for the installation and connection of the air bag and dust collector injection tube. The air flow is smooth and can provide the ash cleaning pulse air flow according to the requirement Model No. And Specification Nominal Diameter Number of diaphragm Intake Port Size Air Outlet Conn ection Form Weight (kg) Metric System mm British System...
-
professional factory for Pulse Valve - Screw c...
Working principle： When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...
-
Reasonable price Baghouse Filter Bags - Framew...
The framework is the “rb”of the filter bag.It is welded once by automatic welding equipment.the welding is firm and the appearance is smooth and straight,so that the filter bag is not damaged.It is light and easy to install and maintain.Zinc plating or plastic spraying process is used for surface post-treatment. Dust removal framework is one of the indispensable main accessories of cloth bag dust remover. It can be compatible with six, eight, ten, twelve, sixteen, eighteen, twenty...