• banner

Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Industrial Dust Collection Systems Manufacturers, Baghouse Solutions, Electrostatic Precipitator Voltage, We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian Detail:

DMF-Y Submerged Electromagnetic Pulse Valve:
DMF- Y electromagnetic pulse valve is a submerged valve (also known as embedded valve), which is directly installed on the gas distribution box and has better flow characteristics. The pressure loss is reduced, which is suitable for the work occassion with lower gas source pressure.
Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, submerged type and straight-through type. The solenoid pulse valve is the compressed air switch of pulse bag dust collector dust cleaning and blowing system.By pulse valve injection controller output signal control, pulse valve is connected with one end of the compressed air package, the other end is connected with the spray pipe, pulse valve back pressure chamber is connected with the control valve, pulse controller controls the control valve and pulse valve open.When the controller has no signal output, the exhaust port of the control valve is closed and the nozzle of the pulse valve is closed.When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out (from the spray torch gas for a wind).Pulse valve life: five years under the condition of standard installation, correct use and reasonable maintenance.

Model No. And Specification

Nominal Diameter

Number of diaphragm

Air Outlet
Connection Form

Weight (kg)

Metric System
mm

British System

DMF-Y-25

ø20

1″

1

G1″

0.8

DMF-Y-40S

ø40

1′/2″

2

G1′/2″

1.2

DMF-Y-50S

ø50

2″

2

ø60

2.5

DMF-Y-62S

ø62

2′/2″

2

ø75

3.5

DMF-Y-76S

ø76

3″

2

ø89

3.7

DMF-Y-90S

ø90

3′/2″

2

ø102

5

DMF-Y-102S

ø102

4″

2

ø114

5.65


Product detail pictures:

Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian detail pictures

Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian detail pictures

Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian detail pictures


Related Product Guide:

Well-run products, skilled income group, and better after-sales products and services; We have been also a unified massive family, all people stick with the business price "unification, dedication, tolerance" for Renewable Design for Baghouse Dust Collector Manufacturers - DMF- Y electromagnetic pulse valve – Xintian , The product will supply to all over the world, such as: Puerto Rico, Frankfurt, Japan, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
  • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Kimberley from Algeria - 2018.06.26 19:27
    Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
    5 Stars By Ingrid from Malaysia - 2017.09.09 10:18
    Write your message here and send it to us

    Related products

    • Short Lead Time for Single Bag Dust Collector - Cyclone Dust Collector – Xintian

      Short Lead Time for Single Bag Dust Collector -...

      Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...

    • China Supplier Dust Collector Replacement Bags - Cyclone Dust Collector – Xintian

      China Supplier Dust Collector Replacement Bags ...

      Under ordinary operating conditions, the centrifugal force acting on the particles is 5 ~ 2500 times that of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with dust removal efficiency of more than 90 percent has been successfully studied. Among the mechanical dust removers, the cyclone dust remover is the most efficient one. It is suitable for the removal of non-visc...

    • Top Quality Charcoal Dust Collector Bags - Filter Cartridge Dust Collector Equipment – Xintian

      Top Quality Charcoal Dust Collector Bags - Fil...

      Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...

    • Special Design for Dust Extractor Filter Bags - Fiberglass Needle-Punched Filter Felt Bag – Xintian

      Special Design for Dust Extractor Filter Bags -...

      It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, minimal elongation and shrinkage, high strength. And the tapetum fiber bears single fiber, three-dimensional micro-porous structure, high porosity and low resistance to gas filtration. It is a kind of high-speed and high­efficiency high-temperature filtering material. It is widely used in high temperature flue gas filtration of industrial kilns such as chemical industry, iron and steel, smelting...

    • Factory making Pulse Jet Valve - Framework of Dust Collector – Xintian

      Factory making Pulse Jet Valve - Framework of ...

      The framework is the “rb”of the filter bag.It is welded once by automatic welding equipment.the welding is firm and the appearance is smooth and straight,so that the filter bag is not damaged.It is light and easy to install and maintain.Zinc plating or plastic spraying process is used for surface post-treatment. Dust removal framework is one of the indispensable main accessories of cloth bag dust remover. It can be compatible with six, eight, ten, twelve, sixteen, eighteen, twenty...

    • Ordinary Discount Bag House Dust - Screw conveyor series – Xintian

      Ordinary Discount Bag House Dust - Screw conve...

      Working principle: When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...