Top Quality Charcoal Dust Collector Bags - Desulphurization dust collector – Xintian
Top Quality Charcoal Dust Collector Bags - Desulphurization dust collector – Xintian Detail:
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the purified smoke rises from the chimney.
The desulphurization rate is higher than 95%, and the outlet concentration of smoke is less than 50mg / Nm3 .
There is no nozzle, which has no blockage, scaling and other problems .
The liquid-gas ratio is low, only about 20% of the air tower spray .
The failure rate is very low, as long as the induced draft fan and the liquid supply pump are normal, the device can operate stably and the operation is very simple.
The consumption of wind pressure is only 1200 – 1500 Pa .
After treatment, the flue gas does not contain foggy water droplets .
Low operating cost and investment .
The limestone slurry, lime slurry, alkali liquor, waste water of alkali liquor and the like can be used as the desulfurizing agent.
For high concentration, it is difficult to deal with the standard flue gas by general method. The flue gas with contents of S02 higher than 10000mg/Nm3 can be purified below 100mg/Nm3.
Product detail pictures:
Related Product Guide:
The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Top Quality Charcoal Dust Collector Bags - Desulphurization dust collector – Xintian , The product will supply to all over the world, such as: Monaco, Peru, Jamaica, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
By tobin from Denver - 2018.02.21 12:14
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Julie from Bangalore - 2018.12.30 10:21
Related products
-
factory customized Pneumatic Pulse Valve - Wat...
The waterproof grade of polyester two-pruned felt filter bag reaches level. It also ensures that the polyester two-pruned felt filter bag is not easy to block in the environment with large humidity, which greatly increases the service life of the filter bag and reduces the difficulty of manual operation. At the same time, the surface of the polyester two-prick needle-proof felt filter bag is smooth and the air permeability is good, which ensures the characteristics of the outer filter surface...
-
Bottom price Bag Filter Dust - P84 High Temper...
P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to ...
-
Super Purchasing for Esp Pollution Control - F...
Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...
-
2021 wholesale price Use Of Electrostatic Preci...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
Special Price for Baghouse Dust - Three-proof ...
In the process of producing needle-punched felt,conductive fibers or conductive materials are mixed into chemical fibers. The filter cloth is rolled and imegnated with PTFE (waterproof agent),which is used in occasions with high moisture content .The filter material is not easy to block the paste bag,the service life of the cloth bag is prolonged,the gas flow rate is increased, and the maintenance cost is greatly saved. The bag has the advantages of high void, good air permeability, high dust...
-
Good Quality Star Servo Valve - Screw conveyor...
Working principle： When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...