New Products
-
Rapid Delivery for China PVC Metering Pump Back and Safe Pressure Relief Valve
DMF-Y Submerged Electromagnetic Pulse Valve:
DMF- Y electromagnetic pulse valve is a submerged valve (also known as embedded valve), which is directly installed on the gas distribution box and has better flow characteristics. The pressure loss is reduced, which is suitable for the work occassion with lower gas source pressure.
Right Angle solenoid pulse valve is the actuator and key component of pulse jet dust cleaning device, which is mainly divided into three categories: right Angle type, submerged type and straight-through type. The solenoid pulse valve is the compressed air switch of pulse bag dust collector dust cleaning and blowing system.By pulse valve injection controller output signal control, pulse valve is connected with one end of the compressed air package, the other end is connected with the spray pipe, pulse valve back pressure chamber is connected with the control valve, pulse controller controls the control valve and pulse valve open.When the controller has no signal output, the exhaust port of the control valve is closed and the nozzle of the pulse valve is closed.When the controller sends a signal to control the vent is opened, the pulse valve back pressure gas discharge pressure reducing, outdoor produce pressure difference on both sides of diaphragm, diaphragm displacement due to the differential effect, injection pulse valve opens, the compressed air from the air bag, through the pulse valve by spray torch holes out (from the spray torch gas for a wind).Pulse valve life: five years under the condition of standard installation, correct use and reasonable maintenance. -
High Temperature Resistant Stainless Steel Industrial Centrifugal Exhaust Fan Blower
Advantages of centrifugal fans
1. Centrifugal fan maintenance is very convenient, some models can be equipped with a cleaning door, and there is no need to disassemble the machine during maintenance, saving time.
2. The centrifugal fan has good ventilation effect, and is especially suitable for use in pipeline ventilation or air supply.
3. Centrifugal fans are usually used to transport air in pipelines, and can be used in places without corrosion, flammable and explosive gases.
4. The impeller of the centrifugal fan is reasonably designed to be backward inclined, with no friction during operation, very low noise and not easy to get dust, and maintenance is very convenient.
5. The surface is sprayed, which has strong oxidation resistance and is not easy to be corroded. The casing and impeller are made of high-quality steel plate, which makes the centrifugal fan very strong and durable. -
Industrial Centrifugal Blower Extractor Dust Removal Exhaust Fans
Voltage: 380V/415V/440V/660V/6KV/10KV
Blade Material:carbon steel/alloy steel/stainless steel
Mounting: FREE STANDING
Feature: High Performance
Total Pressure: 742~7165Pa
System type: single inlet type,overhang type
Color: Grey,blue or by your demand -
Best Price Heavy Duty Industrial Reverse Air Reverse Air Blower Centrifugal Ventilation Fan
Advantages of centrifugal fans
1. Centrifugal fan maintenance is very convenient, some models can be equipped with a cleaning door, and there is no need to disassemble the machine during maintenance, saving time.
2. The centrifugal fan has good ventilation effect, and is especially suitable for use in pipeline ventilation or air supply.
3. Centrifugal fans are usually used to transport air in pipelines, and can be used in places without corrosion, flammable and explosive gases.
4. The impeller of the centrifugal fan is reasonably designed to be backward inclined, with no friction during operation, very low noise and not easy to get dust, and maintenance is very convenient.
5. The surface is sprayed, which has strong oxidation resistance and is not easy to be corroded. The casing and impeller are made of high-quality steel plate, which makes the centrifugal fan very strong and durable. -
Central woodworking dust collector
The central dust collection system is also called the central dust collection system. It is composed of a vacuum cleaner host, a vacuum pipe, a vacuum socket, and a vacuum component. The vacuum host is placed outdoors or in the machine room, balcony, garage, and equipment room of the building.
