Wholesale Price China Electrostatic Precipitator Air Pollution Control - Desulphurization dust collector – Xintian
Wholesale Price China Electrostatic Precipitator Air Pollution Control - Desulphurization dust collector – Xintian Detail:
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the purified smoke rises from the chimney.
The desulphurization rate is higher than 95%, and the outlet concentration of smoke is less than 50mg / Nm3 .
There is no nozzle, which has no blockage, scaling and other problems .
The liquid-gas ratio is low, only about 20% of the air tower spray .
The failure rate is very low, as long as the induced draft fan and the liquid supply pump are normal, the device can operate stably and the operation is very simple.
The consumption of wind pressure is only 1200 – 1500 Pa .
After treatment, the flue gas does not contain foggy water droplets .
Low operating cost and investment .
The limestone slurry, lime slurry, alkali liquor, waste water of alkali liquor and the like can be used as the desulfurizing agent.
For high concentration, it is difficult to deal with the standard flue gas by general method. The flue gas with contents of S02 higher than 10000mg/Nm3 can be purified below 100mg/Nm3.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Wholesale Price China Electrostatic Precipitator Air Pollution Control - Desulphurization dust collector – Xintian , The product will supply to all over the world, such as: Iceland, Belgium, European, Due to our good goods and services, we've received good reputation and credibility from local and international customers. If you will need more information and are interested in any of our solutions, be sure to feel free to contact us. We look forward to becoming your supplier in the near future.
By David from Durban - 2018.06.26 19:27
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Frank from Iran - 2018.02.21 12:14
Related products
-
Factory Price For 1 Micron Dust Collector Bag -...
Product Description Dust collector is a system for filtering dust in flue gas/gas. Mainly used for the purification and recovery of dusty gas. The shell of the air pulse jet bag filter is an outdoor type, consisting of a shell, a chamber, an ash hopper, a discharge system, an injection system and an automatic control system. According to different combinations, there are many different specifications, air filter room and indoor air filter bag. There are four series of bags: 32, 64, 96, 128, w...
-
Special Design for Disposable Dust Collector Ba...
Desulphurization dust collector is a kind of cavitation liquid layer in which the flue gas to be treated in wind energy collecting cavitation room is collided with the desulphurization liquid at the upper end and bottom flow, and the gasliquid two phases collide and cut each other in the form of microbubble mass transfer, and the cavitation liquid layer with the impurity of the arrested set thickens gradually. Part of the breakthrough smoke buoyancy falls to the bottom of the tower, and the ...
-
OEM Factory for Large Dust Collector - Bag fil...
Product Description Dust collector is a system for filtering dust in flue gas/gas. Mainly used for the purification and recovery of dusty gas. The shell of the air pulse jet bag filter is an outdoor type, consisting of a shell, a chamber, an ash hopper, a discharge system, an injection system and an automatic control system. According to different combinations, there are many different specifications, air filter room and indoor air filter bag. There are four series of bags: 32, 64, 96, 128, w...
-
factory customized Pneumatic Pulse Valve - Fra...
The framework is the “rb”of the filter bag.It is welded once by automatic welding equipment.the welding is firm and the appearance is smooth and straight,so that the filter bag is not damaged.It is light and easy to install and maintain.Zinc plating or plastic spraying process is used for surface post-treatment. Dust removal framework is one of the indispensable main accessories of cloth bag dust remover. It can be compatible with six, eight, ten, twelve, sixteen, eighteen, twenty...
-
factory low price Star Cinder Valve - Screw co...
Working principle： When the screw shaft rotates, the material can only move forward along the trough bottom of the conveyor under the push of the blade due to the gravity of the material and the friction force between the material and the trough wall, which is just like the translation movement of the nut that cannot be rotated along the rotating screw [3]. The movement of the material in the middle bearing depends on the thrust of the material moving forward behind. Therefore, the material ...
-
One of Hottest for Dust Collector Bag Filter -...
Pulse filter cartridge dust collector is mainly used in the centralized dust removal system of large factories, with large air volume treatment, small area, suitable for the whole workshop of large factories centralized dust removal, and all the dust from grinding, welding, sand cleaning, mixing, stirring, screening and other processes can be centralized treatment . This series of filter cartridge dust collector is generally arranged outdoors and adopts oblique plug filter cartridge structure...