• banner

Acrylic Medium Temperature Needle-punched Filter Felt Bag

Short Description:

Type: Dust filter bag
Finish treatment: Singeing Calendering
Core Components: filtering, Aramid, Nomex
Top design: Snap band
Body and Bottom: Round
Used for: dust collector
Thickness: 1.7-2.2mm


Product Detail

Product Tags

Using non-woven needle-punching technology, the surface of fine fiber cloth with interlaced strong fibers and uniform void distribution is smoothed by hot rolling and singeing treatment, which is not easy to be blocked by dust. The filter material has large void, good permeability and strong chemical stability. It can not only filter atmospheric temperature gas, but also medium temperature gas. It is the ideal choice of filter materials under acid-alkali corrosive gas condition.
Weight: 500g/m²
Material: Acrylic/Acrylic Substrate Thickness: 1.9mm
Permeability: 14m³/ m²· min
Radial control force: > BOON/5 x 20cm Latitudinal control force: > 1300N/5 x 20cm Radial control force: <25%
Latitudinal control force: <45%
Usage temperature: ≤ 130°C
Post-treatment singeing, catendering

image37 image38 image39Industries Served
image20
Packing
image8


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Right Angle Pulse Jet Air Electric Magnetic Pulse Valve Solenoid Valve for Dust Collector

      Right Angle Pulse Jet Air Electric Magnetic Pul...

      Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...

    • Electric Centrifugal Ceiling Type Exhaust Fan with Pipeline

      Electric Centrifugal Ceiling Type Exhaust Fan w...

      Product Description Industries Served Packing & Shipping

    • DMF-Y-40S 1.5 Inch Bag Filter Diaphragm Clean Air Embedded Valve For Dust Collector Pulse Jet Solenoid Valves

      DMF-Y-40S 1.5 Inch Bag Filter Diaphragm Clean A...

      Product Description Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamber the same, and under the action of the spring, the diaphragm will block the blowi...

    • Low Noise Boiler Exhaust Ventilate Fan Blower

      Low Noise Boiler Exhaust Ventilate Fan Blower

      Product Description Industries Served Packing & Shipping

    • Polyester Antistatic Needle-punched Felt Bag

      Polyester Antistatic Needle-punched Felt Bag

      In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge. Weight: 500g/ m² Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm Permeability: 15 m³/ m²· min Radial control force: > 800N/5 x 20cm Latitudinal control force: > 1200N/5 x 20cm Radial control force:

    • Dust collector pulse Solenoid valve used in industrial bag filter

      Dust collector pulse Solenoid valve used in ind...

      Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...