• banner

P84 High Temperature Resistant Needle-punched Felt Bag

Short Description:

Polyimide fiber, also known as P84 fiber, is a heat-resistant fiber with excellent high temperature resistance. At 300℃ for 100 h, the strength retention rate is 50%, the elongation is reduced by 5% ~ 10%, and the exposure rate is 250 H, strength retention rate of 45%, excellent dimensional stability at 275℃, no melting, glass temperature of 315℃, only release a little harmful gas when decomposition. It can run continuously at 260℃ and the instantaneous working temperature can reach 280℃.


Product Detail

Product Tags

P84 fibers are known for their fineness. The fiber structure characteristics determine that the fiber surface area increases, the pores are small, the dust only stays on the surface of the filter felt but can not penetrate into the filter felt, the backwashing pressure is small, the operating resistance is low, and the elastic removal efficiency of the filter cake can be significantly improved. P84 fiber has strong dust resistance and dust capture ability, and can capture fine dust, so as to improve the filtration efficiency. Due to the irregular cross section of P84 fiber, the fiber has strong binding force and tangling force. Compared with glass fiber, the chemical properties, strength, wear resistance, fracture resistance and service life of P84 fiber are significantly improved. But the P84 fiber is not resistant to hydrolysis.

It has remarkable temperature resistance and good chemical resistance It has certain advantages in filtration of acid waste gas and alkaline dust It has low backwash pressure and high sludge cake efficiency It is used in asphalt plants. cement plants, waste incinerators. liquid bed boilers and coal-fired boilers.
Weight 500g/ m²
Material P84/P84 substrate
Thickness 2 3mm
Permeability 15 m³/ m²· min
Radial control force > 700N/5 x 20cm
Latitudinal control force > 1300N/5 x 20cm
Radial control force <35%
Latitudinal control force <55%
Usage temperatures≤ 260°C
Post-treatment high temperature hot pressing and singeing

image37 image38 image39Industries Served
image20
Packing
image8


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Polyester Needle-Punched Felt Bag

      Polyester Needle-Punched Felt Bag

      Its main use of synthetic fiber, from the plane, for a single fiber irregular staggered combination; Viewed from the direction of section, the needle moving at a certain Angle in the opposite plane makes the single fiber show a complex complexing state . 1, Good air permeability: compared with other fabric filter material, the biggest difference is the pore shape in the filter material. 2, High dust collection efficiency: needled felt (dust bag) single fiber complex,...

    • China Single pulse dust collector solenoid valve manufacturer pulse spray valve explosion-proof valve

      China Single pulse dust collector solenoid valv...

      Product Description Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamber the same, and under the action of the spring, the diaphragm will block the blowi...

    • High quality antistatic needle felt filter bag

      High quality antistatic needle felt filter bag

      In the process of producing needle-punched felt, conductive fibers or conductive materials are mixed into chemical fibers. It is used in industries where flour dust. chemical dust and coal dust may explode in case of electrostatic discharge. Weight: 500g/ m² Material: Polyester/Polyester/Polyester Antistatic Substrate Thickness: 1.8mm Permeability: 15 m³/ m²· min Radial control force: > 800N/5 x 20cm Latitudinal control force: > 1200N/5 x 20cm Radial control force:

    • Factory Original High Quality Dmfz Series Right Angle Electromagnetic Pulse Valve

      Factory Original High Quality Dmfz Series Right...

      Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...

    • Acrylic Medium Temperature Needle-punched Filter Felt Bag

      Acrylic Medium Temperature Needle-punched Filte...

      Using non-woven needle-punching technology, the surface of fine fiber cloth with interlaced strong fibers and uniform void distribution is smoothed by hot rolling and singeing treatment, which is not easy to be blocked by dust. The filter material has large void, good permeability and strong chemical stability. It can not only filter atmospheric temperature gas, but also medium temperature gas. It is the ideal choice of filter materials under acid-alkali corrosive ga...

    • 150mm 230V Dual Inlet Forward Curved Centrifugal Fan

      150mm 230V Dual Inlet Forward Curved Centrifuga...

      Product Description Industries Served Packing & Shipping