Three-proof Polyester Needle-punched Felt Bag (waterproof, antistatic, oil-proof)
In the process of producing needle-punched felt,conductive fibers or conductive materials are mixed into chemical fibers. The filter cloth is rolled and imegnated with PTFE (waterproof agent),which is used in occasions with high moisture content .The filter material is not easy to block the paste bag,the service life of the cloth bag is prolonged,the gas flow rate is increased, and the maintenance cost is greatly saved.
The bag has the advantages of high void, good air permeability, high dust collecting efficiency and long service life, which are peculiar to common felt filter bags. It has moderate high temperature resistance, and can reach 130"C in an instant. It also has moderate acid and alkali resistance. and very good wear resistance.
| Weight | 500/m2 |
| Material | Polyester/Polyester Antistatic Substrate |
| Thickness | 1.8mm |
| Permeability | 11m3/m2.min |
| Radial control force | >1100N/5*20cm |
| Latitudinal control force | > 1300N/5 x 20cm |
| Radial control force | <35% |
| Latitudinal control force | <45% |
| Usage temperatures≤ | 130°C |
| Post-treatment | singeing, calendering or Teflon coating |
Related products
-
Pulse Jet Pneumatic Diaphragm Valve for Dedusti...
Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...
-
Good Quality DMF-Z-25 Right Angle And Submerged...
Product Description Pulse valves are divided into right-angle pulse valves and submerged pulse valves. Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamb...
-
Flumex (FMS) High Temperature Resistant Needle-...
Flumex dust filter bag is composed of two or more kinds of high temperature resistant fiber mixing and laminated, to achieve higher, updated physical and chemical properties. Flumex dust bag has the characteristics of high temperature resistance, high strength, acid and alkali corrosion resistance, wear resistance, bending resistance and so on. After different surface chemical treatment and finishing technology, it also has the characteristics of easy dust removal, w...
-
Square Pulse Filter/Dust Collector for Woodwork...
Product Description The central dust collection system is also called the central dust collection system. It is composed of a vacuum cleaner host, a vacuum pipe, a vacuum socket, and a vacuum component. The vacuum host is placed outdoors or in the machine room, balcony, garage, and equipment room of the building. The main unit is connected to the vacuum socket of each room through the vacuum pipe embedded in the wall. When connected to the wall, only the vacuum socket of the size of an ordina...
-
China Single pulse dust collector solenoid valv...
Product Description Right angle principle: 1. When the pulse valve is not energized, the gas enters the decompression chamber through the constant pressure pipes of the upper and lower shells and the throttle holes in them. Because the valve core blocks the pressure relief holes under the action of the spring, the gas will not be discharged. Make the pressure of the decompression chamber and the lower air chamber the same, and under the action of the spring, the diaphragm will block the blowi...
-
Woodworking Bag House Floor Type Wood Chip Stai...
Product Description The central dust collection system is also called the central dust collection system. It is composed of a vacuum cleaner host, a vacuum pipe, a vacuum socket, and a vacuum component. The vacuum host is placed outdoors or in the machine room, balcony, garage, and equipment room of the building. The main unit is connected to the vacuum socket of each room through the vacuum pipe embedded in the wall. When connected to the wall, only the vacuum socket of the size of an ordina...