News
-
*The design principle of the air distribution device of the pulse dust collector
1) The ideal uniform flow is considered in accordance with the laminar flow conditions, and the flow section is required to be slowly changed and the flow velocity is very low to achieve laminar flow. The main control method is to rely on the proper configuration of the guide plate and the distri...Read more -
*Principles and advantages of electric and pneumatic valves
Electric valves usually consist of electric actuators and valves. The electric valve uses electric energy as power to drive the valve through an electric actuator to realize the opening and closing action of the valve. So as to achieve the purpose of switching the pipeline medium. The electric va...Read more -
*How to ensure the good use effect of dust removal equipment
With the increasing attention to the environment and air pollution, each enterprise has a correct understanding of their own enterprise emissions, emissions of their own enterprises are in the active installation of dust removal equipment, the corresponding call. Dust collector has very high dust...Read more -
*What are the inspection procedures for dust skeleton?
The dust collector skeleton and bag skeleton are fixed at one end, and the other end is twisted to 10 degrees /m for 15 seconds, and then relaxed, and the skeleton can be restored normally without removing welding. Test the tensile strength of each solder joint to withstand 250N without dissolder...Read more -
*Selection and replacement of dust filter bag
Filter bag of dust collector is an important accessory of bag filter. If it is not chosen properly, it will lead to the damage of paste bag or dust bag. When replacing the dust bag, open the top cover of the equipment and directly pull out the bag cage, then the filter bag can be directly pulled ...Read more -
*How is the dust of fold type dust filter bag cleaned dust?
The filter area of fold filter bag is 1.5~1.8 times that of traditional filter bag. When the filter bag is adopted, the volume of the filter is reduced by nearly half in the same filter area, thus reducing the use of steel. Fold type dust collector is equipped with a special dust skeleton. Dust c...Read more -
*Dust removal characteristics of the filter cartridge
1. Deep filtration This kind of filter material is relatively loose, and the gap between fiber and fiber is large. For example, ordinary polyester needled felt has a gap of 20-100 μm. When the average particle size of the dust is 1 μm, during the filtering operation, a part of the fine particles ...Read more -
*Dust removal efficiency of woodworking dust collector
The dust removal efficiency of woodworking dust collector is very high, which can reach more than 99.9/100. The more reasonable the design, the better the effect of the dust collector. When selecting environmental protection equipment, it is necessary to ensure sufficient practical features, so a...Read more -
*How to improve the working efficiency of woodworking dust collector?
1. In specific manufacturing, in order to better reduce the smoke and dust caused by the natural ventilation of the shredder shell, when the raw materials are dry, they are often sprayed at the entrance and exit, which will aggravate the blockage of the dust bag and the vibrating feeder. 2. The d...Read more -
*Installation of dust collector equipment emission standards：
Only when all companies meet the emission standards, the environment we depend on will slowly improve, and the haze that is harmful to us will also disappear. The installation of dust collector equipment for industrial pollution can make our own emissions reach the standard. The environmental pol...Read more
